Wednesday, February 3, 2021

XMAX ACE OPERATION GUIDE

 1. LOAD

LOAD Your XMAX ACE


Remove the ceramic mouthpiece. Loosely fill the oven with botanical material. All material should be inside the ceramic oven.

Load wax cup first for concentrate use. Do NOT load too much wax one time.

Note that the tighter the oven is packed the more draw resistance will be experienced.

 

2. POWER ON/OFF


 

Click Power Button 3 times, the Ace will power on and begin to heat up under the default settings or your last setting temperature.

Click the Power Button 3 times to turn off, and the XMAX Ace will vibrates to indicate off.

 

3. ENJOY XMAX ACE

 

ENJOY XMAX ACE

While heating, the OLED display temperature will goes up. The device vibration indicates readiness and the timer countdown starts.

Inhale through the mouthpiece and enjoy.

This device will automatically begin vaping that removes the need for power/push button vape.

 

4. TEMPERATURE SETTINGS

 

How to do your XMAX ACE TEMPERATURE SETTINGS

Press the Up Button to increase temperature, press the Down Button to decrease temperature.

Click to change by degree, hold to change quickly.

 

5. BOOST MODE

 

BOOST MODE of XMAX ACE

 

Press the Power Button twice to enter boost mode, the device temperature will goes up to 255°C(491°F) directly with real quick, press the Power Button twice to exist boost mode.

 

6. TIMER SWITCHOVER

TIMER SWITCHOVER of ACE

 

The Ace has 2 session timers, 5 minutes and 10 minutes.

lb switchover the 5 minutes and 10 minutes, just hold the Power Button and UP Button at the same time for 3 seconds.

 

7. FAHRENHEIT AND CELSIUS SWITCHOVER

 

SWITCHOVER THE SCREEN of XMAX ACE FROM FAHRENHEIT TO CELSIUS

lb switchover to Fahrenheit, just hold the Power Button and Down Button at the same time for 3 seconds.

 

8. OLED DISPLAY

XMAX ACE OLED DISPLAY

 

 

9. CHARGING

Charge your ACE from usb port

 

10. CERAMIC OVEN CLEANING

CERAMIC OVEN CLEANING

 

Slide the cleaning button to push the material out. Use brush and alcohol cotton swab to sweep inside of oven.

*Tip: Perform a burnoff cycle at max temp for 2 minutes after cleaning.

 

11. MOUTHPIECE & FILTER CLEANING

 

MOUTHPIECE & FILTER CLEANING

 

 

Use brush to clean the mouthpiece tip.

Take off the silicon holder; then you can clean the ceramic filter and mesh screen, please wipe and clean with alcohol wipes and cotton swabs.

Take off the mouthpiece tip, and replace with a new o-ring.

 Source: https://www.topgreen-tech.com/n1862688/XMAX-ACE-OPERATION-GUIDE.htm

 

XMAX ACE OPERATION GUIDE

  1.  LOAD Remove the ceramic mouthpiece. Loosely fill the oven with botanical material. All material should be inside the ceramic oven. Loa...